|
| This blade cuts most building materials, including tarpaper, roofing, nails and nonferrous materials. Also easily cuts pallets, landscape timbers and wood with embedded nails. This blade is not recommended for multi-purpose cutoff saws, including gas-powered saws, unless the saw has a guard that completely covers both the upper and lower halves of the blade.
Due to the rough applications in which it is used, the Heavy Duty Construction Blade is not covered under Oldham’s lifetime warranty.
|
Commercial
Carbide
Heavy Duty
Construction Carbide
| Part No |
UPC Code |
Diameter
Inches |
Number of
Teeth |
Diameter in
MM |
Arbor Size |
Plate
Thickness |
Kerf |
Hook Angle |
Tooth Grind |
| 1207812
|
049551-00452 5
|
12
|
12
|
305
|
1
|
.096
|
.136
|
–5º
|
FTG
|
| 1207824
|
049551-00667 3
|
12
|
24
|
305
|
1
|
.096
|
.136
|
–5º
|
FTG
|
| 1407824
|
049551-00668 0
|
14
|
24
|
356
|
1
|
.109
|
.160
|
–5º
|
FTG
|
THE FOLLOWING WARNING HAS BEEN ISSUED BY O.S.H.A.:
DO NOT USE
THIS BLADE ON MULTI-PURPOSE CUTOFF SAWS, INCLUDING GAS POWER
SAWS, UNLESS
SAW HAS GUARD THAT COMPLETELY COVERS BOTH THE UPPER HALF
AND THE
LOWER HALF OF THE BLADE. THIS GUARD MUST EXTEND TO THE LOWEST
POINT OF THE
CUTTING TEETH ON THE BOTTOM OF THE BLADE. BE SURE TO READ
OWNER'S
MANUAL OF THE SAW AND FOLLOW ALL OF THE INSTRUCTIONS AND SAFETY
PROCEDURES.
ALWAYS WEAR SAFETY GOGGLES. CONSULT OWNER'S MANUAL.
| 
